Valera MANISWISS CORDLESS User Manual download pdf (Page 4)

•The appliance comes equipped with a NiMH battery. To

safeguard the environment, do not dispose of the battery

along with household refuse, but deliver it to a disposal point

for batteries.

•Have the battery removed by qualified technical personnel

or by the treatment and recycling centre.

•Do not expose the battery to liquid, moisture or high

humidity.

•Keep the battery away from magnetic fields, sources of heat

and naked flames.

•Risk of cuts and abrasions. Do not use a damaged appliance.

Replace it immediately.

•Consult your doctor before using the appliance if you are a

pacemaker user

•Do not use the appliance on wounded, irritated or diseased

skin

Important!

•Clean and disinfect all accessories after use.

OPERATING INSTRUCTION

PARTS

1 Maniswiss Professional (651.01)

2 Maniswiss Cordless (651.02)

3 Model 651.01: on / direction of rotation / speed selection

/ off buttons

4 Model 651.02: on / off switch

5 Socket for transformer

6 Clear guard (Model 651.01 only)

7 Fine sapphire cone

8 Coarse sapphire cone

9 Long sapphire cone (Model 651.01 only)

10 Fine sapphire disc

11 Coarse sapphire disc (Model 651.01 only)

12 Felt cone

13 Brush (Model 651.01 only)

14 Needle tip grinder (Model 651.01 only)

15 Ball tip sapphire grinder

16 Flame tip grinder

17 Cylindrical tip grinder

18 Coarse, medium and fine sanding rings and holder (model

651.01 only)

19 Spindle for other accessories (model 651.01 only)

20 Cuticle tool (model 651.01 only)

21 Transformer

22 Aluminium case (model 651.01 only)

23 Case (model 651.02 only)

SUPPLY MAINS POWER

Connect the transformer (21, fig.1) to the appliance by

inserting its plug into the socket on the appliance

(5, fig.1). Plug the transformer into the mains socket.

SWITCHING ON AND OFF

Model 651.01: Press one of the two buttons (3, fig.1)

depending on the desired direction of rotation.

The appliance starts rotating at 3500 rpm. Press the same

button again to increase speed to 6000, 8500 and 11000 rpm.

Keep pressing the same button to reduce speed to 8500, 6000

and 3500 rpm again (fig.2).

Press the other button (3, fig.1) to switch the appliance off.

Model 651.02: Move the switch (4, fig.1) to switch the

appliance on and off. You can choose between two rotation

speeds: 4500 and 6000 rpm.

CHARGING THE BATTERY

(model 651.02 only)

•Charge the battery for 12 hours before using the appliance

for the first time and whenever the battery runs flat from use.

•Switch the appliance off at the switch (4, fig.1). The battery

only recharges when the appliance of switched off.

•Connect the transformer (21, fig.1) to the appliance by inserting

its plug into the socket on the appliance (5, fig.1).

•Plug the transformer into the mains socket.

•Recharge the battery whenever you notice a drop in power

from the appliance.

•When the battery is fully charged, the appliance can be used

for 60 minutes disconnected from the mains electricity

supply

•The appliance can function both on mains power and in

cordless mode using the rechargeable battery.

•If the appliance fails to function on mains power when the

battery is completely discharged, switch it off, charge the

battery for about five minutes, then switch it back on again

using mains power.

FITTING AND REMOVING ACCESSORIES

•Only fit or remove accessories with the appliance switched

off.

•Pull the accessory to remove it from the appliance.

To fit an accessory, push it all the way into its seat (fig.3).

•Model 651.01: Push the sanding rings over their holder. If

necessary, use a suitable tool to remove them (fig.4).

USEFUL HINTS

- Always use clean and properly disinfected accessories.

- Make sure that your skin is clean and dry. Avoid washing

hands or feet immediately before beginning the treatment.

SHORTENING NAILS

Use the fine sapphire cone (10, fig.1). Regular care helps

keep your nails strong.

By abandoning scissors and nail cutters you will be able to

shorten your nails to a more precise length and avoid ingrown

nails.

INGROWING NAILS

Use the needle tip grinder (14, fig.1) or flame tip grinder (16,

fig.1) to treat and prevent ingrown nails. Proceed in small

steps, and with great care. Maintain a steady hand.

CORNS AND CALLUSES

Use the fine sapphire cone (7, fig.1) to remove hard skin from

corns and calluses.

Finish the treatment with the ball tip sapphire grinder (15, fig.1).

HARD SKIN AND CALLOSITIES

Pass the coarse sapphire cone (8, fig.1) over the area to be

treated. Repeat until the hard skin or callosity has been

eliminated. On larger areas use the long sapphire cone (9,

fig.1).

SKIN AROUND THE NAILS

To remove dead skin from around the nails, especially the nails

of the feet, use the flame tip grinder

(16, fig.1).

00060557 norme uso INT lug2013:Layout 1 18/07/2013 8.18 Pagina 5

1 2 3 4 5 6 7 8 9 ... 65 66

Comments to this Manuals

No comments

Valera MANISWISS CORDLESS User Manual Page 4

Comments to this Manuals

Related products and manuals for Cosmetic tools Valera MANISWISS CORDLESS